MV-DP3060-01p

5 0 nga arotake

tauira:
MV-DP3060-01p
Tohu Hua:
Hinarobot
Atanga Raraunga:
Gigabit Ethernet (1000MBit / s), hototahi ki te Ethernet tere (112Mbit / s)
Whakatauranga anga (FPS):
1.3 khz (whānuitanga inenga nui), tae atu ki te 19 khz (Roi Aratau)

State:

Te rahinga:



akoako Whakauru atu ki te kete uiui Wechat wes

Nga waahanga mahi

Hanga-i roto i te inenga nui-nui rawa atu, me te tika ki te taumata o te submicron
Ko te maramara utu nui teitei, te matawai i te reiti tae atu ki te 19 khz
Ka tautokohia nga momo panui maha, kia kaha ake ai
Hangarau Whakawhiwhinga Mulgorithm ALGORITH, nui ake te whakaoti
E waatea ana nga momo tātari maha, a ka kaha ake nga raraunga
Ka tautokohia te kowhiringa a RO, me te tuku nama kotahi-paato, he ngawari ki te whakahaere

Rahi o waho

MV-DP3060-01p3

āhua	āhua	MV-DP3060-01p
āhua	ingoa	Pūāhua kōtaha laser 3D
mahinga	Ko nga tohu o te raarangi kotahi	3200
	Te tawhiti tohutoro	64 mm
	Z-tuakahere inenga	26 mm
	Ko te whānuitanga o te AXIS	32 mm @ tohutoro tohutoro; 27 mm @ proximal mutunga; 36 mm @ Frost End
	Whakawhiti Raraunga Raraunga	8.5 ~ 11.3 μm
	Reeti anga matawai	1.3 khz (whānuitanga inenga nui), tae atu ki te 19 khz (Roi Aratau)
	Momo Putanga Raraunga	Ko te kauwhata taketake, te raarangi o te raraunga, te kauwhata hohonu, te kauwhata kanapa
	Aratau Trigger	Ko te maeneene ngohengohe, he uaua uaua (he rereke te whakakotahitanga)
	Raru laser	405 nm
	Taumata haumaru laser	Akomanga3R
	Z-Axis Whakatau	1.44 ~ 2.86 μm
	Z-Axis Whakarato te tika	0.52 μm @ sensor e whakamatau ana i nga raraunga o te mita paerewa i runga i te papa papaaho
	Raina z-Axis (± toh% o Mr)	0.01
Nga tohu hiko	Atanga Raraunga	Gigabit Ethernet (1000MBit / s), hototahi ki te Ethernet tere (100MBit / s)
	Digital I / O	Ko te atanga 12-pin M12 e whakarato ana i te mana hiko me te / o, 3 te whakauru rereke (raina 0/3/6), 1 Rererangi 1), 1 RS-232
	Powered by	24 vdc
	Te kohi mana angamaheni	15 W @ 24 VDC
hanganga	Rahi o waho	128.5 mm × 93 mm × 62 mm
	taumaha	Tata ki te 850g
	Taumata tiaki IP	Ip67
	pāmahana	Pāmahana whakahaere 0 ~ 45 ° C, pāmahana rokiroki -30 ~ 80 ° C
	pīpīwai	20% ~ 85% rh kore here
Whakatakotoranga Whanui	taonga	3dmvs / vm3d / tahi atu pūmanawa tuatoru
Whakatakotoranga Whanui	Pūnaha Whakahaere	Matapihi 7/10 32 / 64Bit, Windows 11 64bit (maharatanga 8g, i5 kaitukatuka)

āhua	āhua	MV-DP3060-01p
āhua	ingoa	Pūāhua kōtaha laser 3D
mahinga	Ko nga tohu o te raarangi kotahi	3200
	Te tawhiti tohutoro	64 mm
	Z-tuakahere inenga	26 mm
	Ko te whānuitanga o te AXIS	32 mm @ tohutoro tohutoro; 27 mm @ proximal mutunga; 36 mm @ Frost End
	Whakawhiti Raraunga Raraunga	8.5 ~ 11.3 μm
	Reeti anga matawai	1.3 khz (whānuitanga inenga nui), tae atu ki te 19 khz (Roi Aratau)
	Momo Putanga Raraunga	Ko te kauwhata taketake, te raarangi o te raraunga, te kauwhata hohonu, te kauwhata kanapa
	Aratau Trigger	Ko te maeneene ngohengohe, he uaua uaua (he rereke te whakakotahitanga)
	Raru laser	405 nm
	Taumata haumaru laser	Akomanga3R
	Z-Axis Whakatau	1.44 ~ 2.86 μm
	Z-Axis Whakarato te tika	0.52 μm @ sensor e whakamatau ana i nga raraunga o te mita paerewa i runga i te papa papaaho
	Raina z-Axis (± toh% o Mr)	0.01
Nga tohu hiko	Atanga Raraunga	Gigabit Ethernet (1000MBit / s), hototahi ki te Ethernet tere (100MBit / s)
	Digital I / O	Ko te atanga 12-pin M12 e whakarato ana i te mana hiko me te / o, 3 te whakauru rereke (raina 0/3/6), 1 Rererangi 1), 1 RS-232
	Powered by	24 vdc
	Te kohi mana angamaheni	15 W @ 24 VDC
hanganga	Rahi o waho	128.5 mm × 93 mm × 62 mm
	taumaha	Tata ki te 850g
	Taumata tiaki IP	Ip67
	pāmahana	Pāmahana whakahaere 0 ~ 45 ° C, pāmahana rokiroki -30 ~ 80 ° C
	pīpīwai	20% ~ 85% rh kore here
Whakatakotoranga Whanui	taonga	3dmvs / vm3d / tahi atu pūmanawa tuatoru
Whakatakotoranga Whanui	Pūnaha Whakahaere	Matapihi 7/10 32 / 64Bit, Windows 11 64bit (maharatanga 8g, i5 kaitukatuka)

Hono Tere