laden

Delen op:

MV-CH1010-10CC-M72-TF

5 0 beoordelingen
  • MV-CH1010-10CC-M72-TF

  • Hikrobot

  • IMX461

  • 11648 × 8740

  • Camerakoppeling

  • kleur

  • 8.1 FPS

staat:
hoeveelheid:

Functionele kenmerken

  • Ondersteunt automatische of handmatige aanpassing van versterking en belichtingstijd, ondersteunt handmatige aanpassing van LUT- en gamma -correctie

  • Ondersteunt FFC -correctie om de responsverschillen tussen pixels te elimineren

  • Optionele TEC -koeling ondersteunt de belichtingstijd tot 10 seconden, waardoor de beeldkwaliteit wordt gewaarborgd onder lange belichting

  • Ondersteunt 16-bit ADC-uitgang, hoge bemonsteringsnauwkeurigheid en breed dynamisch bereik

  • Ondersteunt vier configuratiemodi: basis, medium, vol en 80-bit

  • Compatibel met camerakoppeling v2.0-protocol en genicam-standaard, kan het naadloos worden verbonden met softwareplatforms van derden

Externe dimensies


MV-CH1010-10cm-M72-TF3

model model MV-CH1010-10CC-M72-TF
naam 101 miljoen pixel camerakop array camera, IMX461, Color, M72 interface, TEC
prestatie Sensortype CMOS, roller sluiter
Sensormodel Sony IMX461
Celgrootte 3,76 μm x 3,76 μm
Doeloppervlakte grootte 55 mm
Oplossing 11648 × 8740
Maximale framesnelheid 8.1 FPS @11648 × 8740 Bayer RG 8
Configuratiemodus Basis, medium, vol, 80-bit
Kanaalmodus 2x_1y, 4x_1y, 8x_1y, 10x_1y
Aantal kanalen 2/4/8/10 kranen
Pixelklok 85 MHz, 70 MHz, 60 MHz, 40 MHz
Dynamisch bereik 78 dB
Signaal-ruisverhouding 45 dB
Verdienen 0 db ~ 36 dB
Blootstellingstijd 14 μs ~ 10 sec
Sluitman Ondersteunt automatische blootstelling, handmatige blootstelling, een klikblootstellingsmodus en ondersteunt de globale reset-modus
Zwart en wit/kleur kleur
Pixelformaat ADC 12bit -modus: Bayer RG 8/10/12
ADC 16bit Modus: Bayer RG 8/10/12/16
Binning Ondersteuning 1 × 1,1 × 2,1 × 4,2 × 1,2 × 2,2 × 4,4 × 1,4 × 2,4 × 4
Downsampling Ondersteuning 1 × 1,1 × 2,1 × 4,2 × 1,2 × 2,2 × 4,4 × 1,4 × 2,4 × 4
Spiegel Horizontale spiegeling ondersteunen
Elektrische kenmerken Gegevensinterface Camerakop (SDR -poort)
Digitale I/O De 12-pins P10-connector biedt voeding en I/O: 1 Optocouple Isolation Input (Line0), 1 Optocouple Isolation-uitgang (Line1), 1 bidirectionele configureerbare niet-geïsoleerde IO (Line2), 1 RS-232; Camera Link Interface biedt IO (CC1/CC2/CC3/CC4)
aangedreven door 24 VDC
Typisch stroomverbruik Niet-koelingsmodus: 12.5 W@24 VDC
Koelingsmodus: 49.7 W@24 VDC
structuur Lensinterface M72*0,75, flens achter Calori 19,55 mm
Externe dimensies 100 mm x 100 mm x 87,2 mm
gewicht Ongeveer 1,7 kg
IP -beschermingsniveau IP40 (onder de juiste kabel- en lensinstallatieomstandigheden)
temperatuur Werktemperatuur 0 ~ 50 ° C, opslagtemperatuur -30 ~ 80 ° C
vochtigheid 20%~ 95%RV zonder condensatie
Algemene specificaties software MVS -software, software voor acquisitiekaartbesturing die voldoet aan het GenLCAM -protocol
besturingssysteem Windows 7/10/11 (32/64BITS)
Protocol/standaard Camerakop v2.0, genicam
Certificering CE, ROHS, KC


Abonneer u op onze nieuwspromoties
, nieuwe producten en verkoop en leveren deze rechtstreeks aan uw inbox

Snelle link

Productclassificatie

Contactgegevens

Mail: anna@zx-vision.com
Landlijn: 0755-86967765
Fax: 0755-86541875
Mobile: 13316429834
Wechat: 13316429834
Copyright © 2024 Shenzhen Zhixiang Vision Technology Co., Ltd. |  Sitekaart | Privacybeleid